[Public-List] Hand rails

[Richard Mair]

On 609 the rails are bolted through with machine screws,screw head on the
outside and nut on the inside so yes all the plugs have to come out..Try
using a wood screw down the middle as they are sometimes held in by the
varnish..
  Richard 609 Into The Blue

On Fri, Sep 17, 2010 at 10:25 PM, Richard J Hughes <rjhughes at shaw.ca> wrote:

> Would like to get some advise on removing, sealing and replacing the hand
> rails on # 438.  Stb side leaks like a sieve!
> They have wooden plugs hiding the hardware and I can't tell if they are
> screwed into each other (interior deck head to exterior coach roof) or not.
> But I hate to drill out 12 wooden plugs each side if not necessary. However,
> the leaks have to stop, especially with the rainy B.C season arriving soon.
> Thanks all comments will be appreciated.
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>

 1284774842.0