[Public-List] broken motor mount bolts

[Richard Mair]

On 609 the logs have aluminum plates embedded. I would try a left handed
drill,you may get lucky and the drill action will spin it out. I have had
this happen but only with mild steel since as you know stainless has to be
kept cool while drilling.
Richard

On Tue, Apr 5, 2011 at 4:32 PM, Don Campbell <dk.campbell at sympatico.ca>wrote:

> Has anyone had experience removing sheared motor mount bolts from the logs
> to hold the motor? I have one sheared off at the top of the fiberglass that
> needs to come out and am looking for ideas to gt it out. Does anyone know
> what the bolts are threaded into, a nut embedded or a plate of steel
> embedded in the log?
> Don
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>

 1302040669.0