[Public-List] Encapsulated iron keel

[George Dinwiddie]

Joseph,

On 4/4/11 10:45 PM, Joseph Balderson wrote:
> i did the same for 115 FREYA. Tore out the floor timbers and thoroughly
> cleaned and sanded (24grit) of the inside of the hull including the top of
> the keel. we poured loose resin down around the edges of the keel then
> glassed from the water tank to stern post. across the top of the ballast
> keel and up the hull 24" on both sides of course. Epoxy  and 17oz DBM. It
> took 4 gal. of resin and 25 yds of cloth.
> Here are photos. It really seemed to knit her together nicely. Has any one
> put a water tank down beneath the cabin sole?

For safety, the list strips off binary files.  If you want to email the 
photos directly to me, I'll place them on the website.

  - George

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------




 1302013286.0