[Public-List] Encapsulated iron keel

[Peter Hurrey]

Rachael, really appreciate your help and those photos did help me. Does not
seem that bad - how long did the job take you and was it expensive or not
too bad? 

Regards,

Peter  Hurrey
Phone 07 54789788
Mobile 0429705067
Email: phurrey at tpg.com.au 

15 Lingard St Palmwoods Queensland Australia 4555	 


-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Rachel
Sent: Thursday, 7 April 2011 8:40 AM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-List] Encapsulated iron keel

On Apr 6, 2011, at 4:14 PM, Peter Hurrey wrote:

> I would like to see those photographs. With a liner boat as is 540 - has
> anyone done something similar?

#221 is a stick-built interior boat, but Don - who has just "gone cruising"
- had the entire liner out of his liner boat (it came to him that way), and
he had photos of the bilge on his boat.

Whew, took a while to look through his blog and I might have missed some
references, but here is one entry with a photograph:

http://alberg30.blogspot.com/2008/06/exposing-ballast-pig.html

I'll see if I can go back and find our correspondence on it, as he and I
compared notes back when we were both working on the bilges.  I don't think
the ballast in his boat had any real rusting problems either.

Rachel
ex=#221
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



 1302170927.0