[Public-List] Custom Gaskets

[Kris Coward]

On Thu, Dec 01, 2011 at 04:02:36PM -0500, John Riley wrote:
> George Dinwiddie wrote:
> > You can also get industrial gasket material by looking under "gaskets"
> > in the yellow pages. If you can use scraps, you can probably get it
> > pretty cheap.  We've got a strip of 1/8" thick neoprene behind the
> > coamings.
> >
> >  - George
> >
> 
> Also, a visit to the local tire shop will likely yield some old truck
> tire inner tubes...when I tried this, they gave them to me free of
> charge, but I had to dig through the pile for what I wanted.  They said
> I could take two, and you get a TON of 'gaskets' out of two 18 wheeler
> inner tubes.

I've also had good luck with bicycle inner tubes as gasket material (and
any bike shop will have plenty in the garbage that you can take for
free). I've also noticed in the past that the bike inner tubes (and I'm
guessing also the truck tubes) are made of butyl rubber, so given
butyl's desirability for other sealing jobs, inner tubes should work
quite well enough.

Cheers,
Kris

-- 
Kris Coward					http://unripe.melon.org/
GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3

 1322773892.0