[Public-List] hole free deck cleats

[crufone at comcast.net]

I have some of these in galvanized steel on our sea wall cap here in Ft. Myers, FL. No idea of the source. They appear to be fastened with some type of adhesive, plus I have no idea if they have any extension which protrudes into the concrete cap any distance. They are not in a location for any boat use for my current set-up, but they do make a convenient? device to trip over!!!! 

Michael #133 



BTW, you might try contacting Buck-Algonquin, Bristol Bronze, Spartan, etc. and see if they will set aside some prior to drilling. 



----- Original Message -----


From: "David Tessier" <dfjtessier at hotmail.com> 
To: "Alberg 30 List Start thread" <public-list at lists.alberg30.org> 
Sent: Saturday, December 3, 2011 10:02:36 PM 
Subject: [Public-List] hole free deck cleats 


I am looking for sturdy deck cleats, in stainless steel, bronze or aluminium without holes for fasteners.  It occurs to me that this might be possible if cleat blanks are first cast and then holes drilled/machined in a finishing operation. Any thoughts, leads and suggestons would be welcome. Dave #319                                                 
_______________________________________________ 
These businesses support your Association: 
http://www.alberg30.org/store/A30supporters.html 
Please support them. 
_______________________________________________ 
Public-List mailing list 
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 

 1323012060.0