[Public-List] Standing rigging tensions

[Mike Lehman]

Use the tension from US17 - it is probably the most ideal

-----Original Message----- 
From: Gordon Laco
Sent: Tuesday, June 14, 2011 3:24 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-List] Standing rigging tensions

I found it.....


On 14/06/11 3:19 PM, "Gordon Laco" <mainstay at csolve.net> wrote:

> Hello gang -
>
> I recall George D tabulated a list of standing rigging tensions someplace 
> on
> the association site ­ can any of you help me find it?
>
> Gord #426 Surprise
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


 1308079918.0