[Public-List] Standing rigging tensions

[Gordon Laco]

Thanks Mike


On 14/06/11 3:31 PM, "Mike Lehman" <Sail_505 at hotmail.com> wrote:

> Use the tension from US17 - it is probably the most ideal
> 
> -----Original Message-----
> From: Gordon Laco
> Sent: Tuesday, June 14, 2011 3:24 PM
> To: Alberg 30 Public List -- open to all
> Subject: Re: [Public-List] Standing rigging tensions
> 
> I found it.....
> 
> 
> On 14/06/11 3:19 PM, "Gordon Laco" <mainstay at csolve.net> wrote:
> 
>> Hello gang -
>> 
>> I recall George D tabulated a list of standing rigging tensions someplace
>> on
>> the association site ­ can any of you help me find it?
>> 
>> Gord #426 Surprise
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



 1308080104.0