[Public-List] waterline height

[Roger L. Kingsland]

Thanks Mike, good idea.  I am sure I have that "elevation drawing" blown up
to 1/2" = 1' scale somewhere.  

Roger Kingsland, Managing Partner

Kingsland Scott Bauer Associates

 

   KSBA 

________________________________

Architects/Planners/InteriorDesigners/ProjectManagers

 

3441 Butler Street

Pittsburgh, PA 15201

N 40° 27.8344'  W79° 57.9831'

 

412-252-1500 ext.101 

412-779-5101 cell 

412-252-1510 fax

r.kingsland at ksba.com

www.ksba.com

 

 

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Meinhold,
Michael J.
Sent: Monday, June 20, 2011 3:55 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-List] waterline height

Roger -
 You can find the A30 outboard profile on the website - it should be
accurate and can give you the vertical offset of the deck edge to the
waterline and the boot stripe top. You can scale this and measure
vertically , accounting for the orientation of the boat on her stand.
Let me know offline  if you cannot find  the outboard profile and I can
send it to you.

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Roger L.
Kingsland
Sent: Monday, June 20, 2011 3:39 PM
To: 'Alberg 30 Public List -- open to all'
Subject: [Public-List] waterline height

Gord and Mike (Lehman),

I sent you each of-line emails similar to the one below on Friday but
have
been having computer problems and I they might not have gotten to you
but
might if I sent them on "the page."  Also, if anyone could help me get
the
dimensions from the deck to waterline, I would greatly appreciate it.  I
did
the bottom paint yesterday and, not knowing where to put the top, I held
it
low and good old 148 now has a weird looking 18" deep boot stripe.

Here is the original email:

"Hope you and yours are well.  We just finished the sealer coat on good
old
148's bottom; starting to see the light.  We are thinking, rather than
launch in the river this year and finish the interior while afloat; we
might
just finish her on the trailer in July and August in time to get to The
Bay
for the good September/October sailing.

 

We were going to launch without anit-fouling paint, let the dirty line
from
the river water mark the water line, and add bottom paint in the fall.
But,
the new plan requires outside data to establish the top of the bottom
paint.

 

If you are going aboard this weekend, might you please do me a big
favor;
with no one on the boat (or at lease similar weight people at each end,
then
each side), measure the height of the FG deck (not including, taffrail,
toerails, the stem plate and the wood under it) above the water at the
bow,
stern and amidships.   I am trying to establish the top of my bottom
paint
and if I know the waterline dimensions, I can establish my line.

 

Please call my cell with questions; no big deal if you don't have time.

 

Best,

 

Roger"


_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1308601091.0