[Public-List] Baby Stay Mast Connection ?

[Gordon Laco]

Hello there - 

I'd be interested in your engine for spares.

Gord Laco
#426 Surprise (in Midland but often in Toronto for business)


On 03/03/11 2:42 PM, "C Spalding" <cspalding at sympatico.ca> wrote:

> Spring is almost here and time to look at mast projects
> Installing a baby stay and inquiring as to the distance above the spreaders to
> install the connection
> Will use a 3/8 inch through bolted tang
> Deck connection will be at the anchor locker bulkhead which has been bulked up
> with 2 layers of 1/4 inch ply each glassed to the underside crown of the deck
> with 2 knees glassed to the anchor bulkhead and installed ply
> will use a pelican hook and turnbuckle
> 
> -- don't want to install too far above the spreaders as I do not want to add
> backstay shrouds
> 
> If anyone has acomplished this before their experience would be appreciated
> 
> Thanks
> C Spalding
> Blue Horizon
> #374
> Toronto, Canada
> PS In the future I will be selling off the Atomic 4 for parts or transmission
> rebuild (motor does work last time I started it which was 3 years ago)
> the muffler made from copper (i'll give a spot a shine to make sure)
> the boom, don't know if it is orginal or not it's 14Ft 9In roller with handle
> so if anyone is interested send me an email
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



 1299182216.0