[Public-List] Conversion of water tank to holding tank

[Gordon Laco]

Hello Michael - 

I've considered those options.  I'd either epoxy the inner surfaces then
paint them.... Or install a bladder tank such as Plastimo makes and use the
tank as an enclosure for it.

Both those options were under consideration before we realized that what we
called 'the foot bath' was in fact the factory option liner-boat holding
tank without it's lid.  We used that and it has been quite satisfactory.

Gord #426 Surprise


On 25/10/11 12:36 PM, "crufone at comcast.net" <crufone at comcast.net> wrote:

> 
> 
> George and others,
> 
> What about applying a coating to the inside of the water tank if human waste
> does absorb into the fiberglass tank material? Could one install a flexible
> bladder tank into the original water tank? Has anyone done either of these two
> procedures? 
> 
> Michael #133 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



 1319561637.0