[Public-List] Muffler Design

[pat nolan]

Our engines are made from iron and have a zinc anode that sacrifices its self so that our engines may survive. Galvanizing is zinc coating of  "black iron" pipe. Adding more zinc to the equation cannot be a good thing!  Adding other metals , such as stainless or bronze , must make shuffling of electrons much more vigorous ! Use " black iron" , check and change zincs often , enjoy!


________________________________
From: randall weatherspoon <rlwspoon at earthlink.net>
To: public-list at lists.alberg30.org
Sent: Sunday, October 30, 2011 9:20 PM
Subject: [Public-List] Muffler Design

I have taken the muffler apart and have sketched it and have pictures - most
of the shops around here are estimating ~$400.00 for a Stainless Steel-- but
have not gotten into details after the first estimate. The biggest problem
appears to be the 3.5" SS outer tube as they say that they have to buy a
longer length and have a lot of drop -

I will clean up the sketch and send pics - just contact offline with
"Muffler" as subject and I will send -

How do we get posted on Alberg Site?



Randy 

Marisel #385

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 1320041189.0