[Public-List] Muffler Design

[James Allocco]

Hi Randy,

I would like a copy of your sketches. Would it be asking to much to send me
a drawing by snail mail. The address is
 James Allocco,
PO Box 160,
 Oriental, NC 28571.

May be if the fitting locations on your drawing are similar to my pipe and
others we could do a group purchase.

As I said earlier the stainless standpipe I have now lasted 22 years. I
have had to replace the connecting elbows or street el's twice in that
time. Once I used black iron and once bronze.

Also, what zincs are on the engine?

Jim Allocco



On Mon, Oct 31, 2011 at 5:46 AM, George Dinwiddie
<gdinwiddie at alberg30.org>wrote:

> Hi, Randy,
>
> On Oct 31, 2011, at 1:20, "randall weatherspoon " <rlwspoon at earthlink.net>
> wrote:
>
> > I have taken the muffler apart and have sketched it and have pictures -
> most
> > of the shops around here are estimating ~$400.00 for a Stainless Steel--
> but
> > have not gotten into details after the first estimate. The biggest
> problem
> > appears to be the 3.5" SS outer tube as they say that they have to buy a
> > longer length and have a lot of drop -
> >
> > I will clean up the sketch and send pics - just contact offline with
> > "Muffler" as subject and I will send -
> >
> > How do we get posted on Alberg Site?
>
> Email the pictures to me and I'll be happy to post them.
>
> George
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>

 1320067844.0