[Public-List] Through Hull size Head outlet

[Mike Lehman]

While most of the thru hulls are 1-1/4" or smaller the head discharge is 
generally 1-1/2". To eliminate reducing/enlarging bushings in the plumbing 
to the head, you should check the size hose that fits properly on the head 
and use a corresponding size for the thru hull. Here's a great place to 
order thru hull fittings:

http://store.hamiltonmarine.com/search.htm

Hope this helps

-----Original Message----- 
From: LAF
Sent: Tuesday, September 13, 2011 12:58 AM
To: public-list at lists.alberg30.org
Subject: [Public-List] Through Hull size Head outlet

Can someone tell me the size of the through hull for the head outlet on a
1968 Alberg 30?
I am hoping to order a new seacock before getting the seized one apart, but
can only measure the outside threads at 1 1/2", need ID.
Getting the boat ready to go back in the water.
Thank you Linda
-- 
Slan Abhaile
Gaelic: Safe journey home
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


 1315916436.0