[Public-List] Mast Step

[Gordon Laco]

Good morning Bob - 

That looks very good.

Gord #426 Surprise


On 18/04/12 8:27 AM, "Bob Crinion" <bob at crinion.ca> wrote:

> Hi All,
> 
> Here is one example of how to make one:
> http://www.thevirtualboatyard.com/2009/06/building-a-better-mast-step.ht
> ml  I used a variation of this method to build one.
> 
> I took a piece of 1/2" fiberglass laminate that was cut out of a huge
> fiberglass water tank and epoxied a couple scrap pieces of 12 layer
> mahogany plywood that is used for structural use in boat building
> (bulkheads). Total cost 5 dollars to the dude in the fiberglass shop's
> coffee fund to cut out the fiberglass scrap piece... One thing, I will
> not have to worry about corrosion.
> 
> I can provide pictures if interested.
> 
> -bob
> #560
> 
> 
> 
> -----Original Message-----
> From: public-list-bounces at lists.alberg30.org
> [mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Meinhold,
> Michael J.
> Sent: April-17-12 12:16 PM
> To: Alberg 30 Public List -- open to all
> Subject: [Public-List] Mast Step
> 
> Does anyone have a spare Mast Step?
> Alternatively, does anyone have design or drawing or supplier for a new
> one in stainless steel?
> 
> Thanks
> Mike
> Rinn Duin #272 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



 1334752316.0