[Public-List] Bottom paint

[John Birch]

3 litres of Pettit's Unipoxy Plus covers an Alberg 37 bottom up here in the 
Great Lakes. I roll & tip it to avoid roller stipple. I get 2 years out of 
the paint even though we haul each fall. Of course that is in fresh water.

John


----- Original Message ----- 
From: "Gordon Laco" <mainstay at csolve.net>
To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
Sent: Friday, March 30, 2012 3:42 PM
Subject: Re: [Public-List] Bottom paint


> For an Alberg 30!?
>
> I think 3-4 quarts would be plenty.  We're in fresh water so I use one 
> liter
> (slightly more than a quart) of International's Bottomcote thinned 50/50
> every second year.  That covers the bottom with no difficulty.
>
> Gord #426 Surprise
>
>
> On 30/03/12 3:39 PM, "Bill Ydel" <wcydel at gmail.com> wrote:
>
>> I need to get my Bottom done later this year and one of the yards that I 
>> am
>> considering said it would take between 4 and 5 Gallons. That seems high 
>> to
>> me, it has been a few years, but would 2 gallons not be more correct.
>>
>>
>>
>> Bill
>>
>> SallyB
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 



 1333881900.0