[Public-List] Mast Step

[Bob Crinion]

Hi All,

Here is one example of how to make one:
http://www.thevirtualboatyard.com/2009/06/building-a-better-mast-step.ht
ml  I used a variation of this method to build one.

I took a piece of 1/2" fiberglass laminate that was cut out of a huge
fiberglass water tank and epoxied a couple scrap pieces of 12 layer
mahogany plywood that is used for structural use in boat building
(bulkheads). Total cost 5 dollars to the dude in the fiberglass shop's
coffee fund to cut out the fiberglass scrap piece... One thing, I will
not have to worry about corrosion.

I can provide pictures if interested.

-bob
#560



-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Meinhold,
Michael J.
Sent: April-17-12 12:16 PM
To: Alberg 30 Public List -- open to all
Subject: [Public-List] Mast Step

Does anyone have a spare Mast Step?
Alternatively, does anyone have design or drawing or supplier for a new
one in stainless steel?

Thanks
Mike
Rinn Duin #272 


_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1334752072.0