[Public-List] Making a new table leg.

[Jeffrey]

Jeremy,
I have what looks to be an original setup.  I could supply measurements if
that would help. Do you have the female socket in the bunk?

Jeff

SEAGRASS #116
On Aug 6, 2012 12:35 AM, "Jeremy Brown" <j_l_brown at shaw.ca> wrote:

> One of the previous owners of my boat kindly removed the table leg and
> associated fitting from the table and chucked it in favor of bolting the
> table directly to the bulkhead at one end of the settee.  I'm trying to
> return the table to where it belongs, they had done this partly to run the
> wires for the propane heater up through the table leg instead of through
> the proper wire hole.  I've run the wires more appropriately, and now I'm
> looking to get the table back close to stock, or even better if anyone has
> any suggestions, dimensions or plans they would be much appreciated!
>
> Thanks
>
> Jeremy
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>

 1344248037.0