[Public-List] Making a new table leg.

chris123 chris.herrnberger at gmail.com
Sat Aug 11 05:38:25 PDT 2012


I dont know about the knock offs, but the original ones some 300
dollars in the EU are used on many boats new and old. But stuff is
much more expensive over the pond so I really cant comment on the
quality of the US distributed ones.

Best regards

/ch


On Sat, Aug 11, 2012 at 3:10 AM, Jeremy Brown <j_l_brown at shaw.ca> wrote:
> How are they for durability?  It just looks much fussier and more fiddly, with the threaded locking parts vs a pin that sets in a couple of positions.  I've noticed that most newer furniture on boats seems to be more adjustable, lighter but requires a lot more mucking around with at all times.  Looks like a good option if it's durable, I may order one soon and I'll report back if I do.
>
>
> ----- Original Message -----
> From: "chris123" <chris.herrnberger at gmail.com>
> To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
> Sent: Monday, August 6, 2012 7:46:01 PM
> Subject: Re: [Public-List] Making a new table leg.
>
> If original is not an requirement these legs are amazing. Found in
> euro boats mostly, they double as a salon table or cockpit table with
> an extra fitting. This company make knock off of the original swedish
> product which is around 400 CDN. Ive seen them used as individual
> tables as well one on starboard one on port as the table size is up to
> you. You can make the table top removable so everything stows out of
> the way as well. One boat had a mounting in the ceiling, where the
> table was stored when not in use, alternatively a bulkhead makes a
> nice storage area as well.
>
> http://www.cascadedepot.com/servlet/the-197/Anodized/Detail
>
> /ch
>
> On Mon, Aug 6, 2012 at 6:24 PM, Dustin Hogard <dustinhogard at gmail.com> wrote:
>> I'm working on a new table as well. Previous owner lost the Z leg, so I was
>> going to cut it in half and mount it on the port bulkhead as a drop down
>> leaf table. But if there are better solutions out there, I'd be interested
>> in what others have done. This might also be a good time to ask if anyone
>> still has the custom mounts or a supplier for the cockpit table adapted
>> project that some Alberg 30 guys did a bulk order of a while back. If I can
>> get one of those I'll keep my table intact for the cockpit and will make
>> another folding one with leaf for the bulkhead. Any experience, photos,
>> leads, or recommendations on this is greatly appreciated.
>>
>> Dustin
>> #140
>>
>> On Mon, Aug 6, 2012 at 4:50 PM, j_l_brown <j_l_brown at shaw.ca> wrote:
>>
>>> That sounds really cool, I'd love to see pictures.  I was thinking of
>>> having it fold over the top instead, create an angled desk for laptop that
>>> way, or fold out for full table.
>>>
>>>
>>> Brian Zinser <bzinser at lssu.edu> wrote:On 8/6/2012 12:35 AM, Jeremy Brown
>>> wrote:
>>> > One of the previous owners of my boat kindly removed the table leg and
>>> associated fitting from the table and chucked it in favor of bolting the
>>> table directly to the bulkhead at one end of the settee.  I'm trying to
>>> return the table to where it belongs, they had done this partly to run the
>>> wires for the propane heater up through the table leg instead of through
>>> the proper wire hole.  I've run the wires more appropriately, and now I'm
>>> looking to get the table back close to stock, or even better if anyone has
>>> any suggestions, dimensions or plans they would be much appreciated!
>>> >
>>> > Thanks
>>> >
>>> > Jeremy
>>> > _______________________________________________
>>> > These businesses support your Association:
>>> > http://www.alberg30.org/store/A30supporters.html
>>> > Please support them.
>>> > _______________________________________________
>>> > Public-List mailing list
>>> > Public-List at lists.alberg30.org
>>> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> Jeremy,
>>>
>>> I don't have the standard table. I have a post mounted table which has a
>>> plate with a recessed hole in the floor. My table is like a drop leaf
>>> and when removed from the post, it fits on the shelve in the v-berth and
>>> I put the post in the hanging locker. I did not make the modification,
>>> the boat came with it. I have thought about getting a modified
>>> inspection plate in the cockpit floor that would accommodate the post
>>> leg so the table could also be used in the cockpit.
>>>
>>> On nice feature of the drop leaf design is that when one side is
>>> dropped, you can actually move through the cabin.
>>>
>>> Brian Zinser
>>> #134
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
>
> --
> /ch
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



-- 
/ch

 1344688705.0


More information about the Public-List mailing list