[Public-List] Making a new table leg.

[Dustin Hogard]

I'm working on a new table as well. Previous owner lost the Z leg, so I was
going to cut it in half and mount it on the port bulkhead as a drop down
leaf table. But if there are better solutions out there, I'd be interested
in what others have done. This might also be a good time to ask if anyone
still has the custom mounts or a supplier for the cockpit table adapted
project that some Alberg 30 guys did a bulk order of a while back. If I can
get one of those I'll keep my table intact for the cockpit and will make
another folding one with leaf for the bulkhead. Any experience, photos,
leads, or recommendations on this is greatly appreciated.

Dustin
#140

On Mon, Aug 6, 2012 at 4:50 PM, j_l_brown <j_l_brown at shaw.ca> wrote:

> That sounds really cool, I'd love to see pictures.  I was thinking of
> having it fold over the top instead, create an angled desk for laptop that
> way, or fold out for full table.
>
>
> Brian Zinser <bzinser at lssu.edu> wrote:On 8/6/2012 12:35 AM, Jeremy Brown
> wrote:
> > One of the previous owners of my boat kindly removed the table leg and
> associated fitting from the table and chucked it in favor of bolting the
> table directly to the bulkhead at one end of the settee.  I'm trying to
> return the table to where it belongs, they had done this partly to run the
> wires for the propane heater up through the table leg instead of through
> the proper wire hole.  I've run the wires more appropriately, and now I'm
> looking to get the table back close to stock, or even better if anyone has
> any suggestions, dimensions or plans they would be much appreciated!
> >
> > Thanks
> >
> > Jeremy
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> Jeremy,
>
> I don't have the standard table. I have a post mounted table which has a
> plate with a recessed hole in the floor. My table is like a drop leaf
> and when removed from the post, it fits on the shelve in the v-berth and
> I put the post in the hanging locker. I did not make the modification,
> the boat came with it. I have thought about getting a modified
> inspection plate in the cockpit floor that would accommodate the post
> leg so the table could also be used in the cockpit.
>
> On nice feature of the drop leaf design is that when one side is
> dropped, you can actually move through the cabin.
>
> Brian Zinser
> #134
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>

 1344291846.0