[Public-List] A 30 Dodger

[Glennb]

George, 

This spring I asked a couple of canvas shops to quote replacement dodger for Dolce, 318.  they said they just come down to the boat and take measurements and fabricate the tubing and fabric to suit the curvature of the deck and cabin.  i suspect a local canvas shop could build one to fit your boat. You could design the clear plastic windows to suit your needs. also there is at least one local guy in the Seattle area who makes the dodger frame out of rigid SS tubing, which acts like a cockpit pulpit/grab rail.  Quotes came in at around $2000 USD.  $3000 for the oversized rigid tubing with hand rails.  I didn't  order a replacement as I spent the money on other stuff.

Not sure if there is a standard original design...

Glenn 
dolce 318

Sent from my iPad

On Aug 11, 2012, at 7:47 AM, "George White" <salty at ns.sympatico.ca> wrote:

> Hello:
> 
> I am looking to replace a hard dodger on hull 637 (Year 1979) with a soft dodger and tubing.  What are the sources of dodgers for Alberg 30?  Are there different designs?  Was there any change in the deck or hull configuration which would render the plans for an earlier hull number either not applicable or requiring adaptation?
> 
> Thanks,
> George White
> 
> Close Harmony, 637
> Pictou, NS Canada
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1344705210.0