[Public-List] good news and bad news

[Jim Mennucci]

Try turning down a 5/8-11 bolt to 1/2"

Jim Mennucci

On Wed, Feb 1, 2012 at 5:02 PM, George Dinwiddie <gdinwiddie at alberg30.org>wrote:

> I pulled the rudder shoe off of Calypso this afternoon. The good news is
> that, in spite of considerable play, the pin is in good shape. The bad news
> is that the threads are gone in the bottom of the rudder post.
>
> My first thought is to put a bushing in there. Does anyone know where I
> can get a 5/8-11 to 1/2-13 silicon bronze reducing bushing?
>
> My fallback is to go to a 5/8" pin, but that means drilling into a
> perfectly good rudder shoe. I'd rather not do that.
>
>  - George
>
> --
>  ------------------------------**------------------------------**
> ----------
>  When I remember bygone days                         George Dinwiddie
>  I think how evening follows morn;            gdinwiddie at alberg30.org
>  So many I loved were not yet dead,           http://www.Alberg30.org
>  So many I love were not yet born.                          also see:
>               'The Middle' by Ogden Nash     http://idiacomputing.com
>  ------------------------------**------------------------------**
> ----------
>
>
>
> ______________________________**_________________
> These businesses support your Association:
> http://www.alberg30.org/store/**A30supporters.html<http://www.alberg30.org/store/A30supporters.html>
> Please support them.
> ______________________________**_________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/**listinfo.cgi/public-list-**alberg30.org<http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org>
>

 1328140968.0