[Public-List] Need lots of Alberg info

[Mike Lehman]

Dan

It sounds like you plan to have the boat trucked to the Chesapeake. You 
could have it delivered to Ferry Point Marina on the Magothy. They have the 
equipment to unload the boat and launch it when the work is done. It is a 
short sail to Gibson Island. I could help with the work, I am retired and 
spend my time restoring Albergs and helping members with their projects and 
I have owned an Alberg 30 for 35 years, that I maintain myself. I also live 
a block away from Ferry Point and my boat is there for the winter. I know 
the boat very well. If any rigging needs repair/replacing and it is beyond 
my ability or equipment, I can recommend a rigger who is also and Alberg 
person. If this interests you, contact me 'off list' to discuss details. 
What is your time schedule?

Mike Lehman
~~~_/)_/)~~_/)~~~


-----Original Message----- 
From: Dan Marks
Sent: Wednesday, February 08, 2012 12:37 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-List] Need lots of Alberg info

George,

I need someone who can do the work.

In regards to the deck. The running lights need to be installed and wired. 
All cleats need to be installed.

In regards to the rigging. It all needs to be inspected,  I need a steaming 
light and anchor light installed and wired.

once this is all done I then need  to register the vessel and launch.

Everything else can wait.



Dan Marks
Mobile: 412-877-6310

On Feb 8, 2012, at 12:22 PM, George Dinwiddie <gdinwiddie at alberg30.org> 
wrote:

> Dan,
>
> On 2/8/12 11:52 AM, Dan Marks wrote:
>> I have somewhat inherited an Alberg 30 perfect-intentions # 148. I
>> have plans to moore her at the Gibson Island Club, but before I can
>> launch I am in need of the following:
>
> The Magothy is a great river for sailing. Tern II is also at Gibson 
> Island.
>
>> A good trusting boatyard that I can ship her too in March plus
>> someone who can install deck hardware. I m also looking for a good
>> rigger.
>
> What's important to you in a boatyard? Are you looking for low cost, 
> convenience from home, good boat workers, do-it-yourself friendly, ...? 
> What sort of rigging do you need done?
>
>> Thanks so much for any input. I will see you all at the Maintanace
>> Seminar on the 18th.
>
> Sorry, but I'll miss you. I'll be in India that weekend. I hope to see you 
> at other events.
>
> - George
>
> -- 
> ----------------------------------------------------------------------
>  When I remember bygone days                         George Dinwiddie
>  I think how evening follows morn;            gdinwiddie at alberg30.org
>  So many I loved were not yet dead,           http://www.Alberg30.org
>  So many I love were not yet born.                          also see:
>               'The Middle' by Ogden Nash     http://idiacomputing.com
> ----------------------------------------------------------------------
>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


 1328724215.0