[Public-List] Top loading ice box

[Jacques Dusseault]

Mike,

I reinsulated the icebox and added a holding plate in Kilwinning #446
(liner).  I raised the top by 5 in. To allow insulation on the top and lids.
I insulated most of the rest by building a new raised insulated bottom.  The
back was insulated from the locker side.  It's no perfect but has worked
well.  The box is divided into 2 sections, the largest area is the refrig.
(engine side) and the smaller (hull side) holds the holding plate and is the
freezer area.  I can send you a picture of the finished product if
interested.  

Jacques

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Mike Lehman
Sent: January-09-12 11:55 AM
To: A30 Public List
Subject: [Public-List] Top loading ice box

Has anyone ever removed the counter top on the top loading ice box on the
liner style boats. I am considering this project to insulate the ice box and
I am looking for advice from someone that has done this job in the past.

Mike Lehman
~~~_/)_/)~~_/)~~~
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1326129710.0