[Public-List] Holding Tank

[John Riley]

Raritan is the company that made the one to the association's specs. 
They will still make them.  When I bought mine a few years ago, they did
have to custom make it and it was about $250 or so, but I don't recall
any wait at all.  I had it less than a week after placing the order.


George Mathis wrote:
> I looked that up recently, but the company (raritan I think) had none in stock and would have had to make a new one for $300 or so and there was a wait.
> Instead, I went with a rectangular todd 13 gallon model in stock at west marine, I can get the part# for you ... I think it cost about $100.
>
>
>
>
>
>
>   
>> Date: Thu, 28 Jun 2012 05:37:33 -0700
>> From: bob at crinion.ca
>> To: public-list at lists.alberg30.org
>> Subject: [Public-List] Holding Tank
>>
>> Hi All,
>>
>>  
>>
>> I'm looking for the supplier of the holding tanks that were used in the
>> hull liner boats under the port V-berth.
>>
>> Anyone remember the cost and model number?
>>
>>  
>>
>> Thanks,
>>
>> -bob
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>     
>  		 	   		  
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>   


-- 
John S. Riley
S/V Gaelic Sea
1972 Alberg 30 #521


 1340893834.0