[Public-List] Holding Tank

[Mike Lehman]

Bob

I just did this job yesterday on hull #655 and it took about 4 hours. I took 
pictures, but the list cannot take attachments. I got very clever on the top 
support which made installation a breeze. I will get George, when he returns 
from his week of sailing, to post the on the A30 site. Meanwhile the tank is 
made by Raritan...it is a stock tank but you have to specify the fitting 
locations and the delivery is about 3 weeks for the 'customization'. I like 
the Raritan tank because it is 14 gallons and has 3/8" wall thickness rather 
than other thank thinner walled tanks. The cost was $326 includes shipping. 
Here is a link to the exact tank. I also used Raritan's new sani-flex hose. 
It is expensive (about $12/ft. at Defender) but it turns a 5" radius and 
fits perfectly over the hose fittings without heating or excessive 
force...it also has a 5 year odor shield warranty...it is GREAT hose. For 
the 1-1/2" fittings on the top of the tank use Shields low-profile 
fittings...$32 each at West Marine...$7 each every where else (Jamestown, 
etc.)..do the price match guarantee if you buy it them at West Marine.

http://alberg30.org/maintenance/Head/RaritanNewer/

Mike Lehman

><((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>
-----Original Message----- 
From: Bob Crinion
Sent: Thursday, June 28, 2012 8:37 AM
To: Alberg 30 Public List -- open to all
Subject: [Public-List] Holding Tank

Hi All,



I'm looking for the supplier of the holding tanks that were used in the
hull liner boats under the port V-berth.

Anyone remember the cost and model number?



Thanks,

-bob

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


 1340910893.0