[Public-List] Sail track rivets on mast - SS Machine screws

Nicki Crutchfield nickicrutchfield at mac.com
Mon Mar 26 10:56:14 PDT 2012


Hello all,
My first post after much reading here. 
Monel is the preferred option here in the UK. It is apparently inert when mixed with aluminium and, though more expensive than aluminium ones, I wouldn't use stainless. Depends if you are in a salt water environment or not. The black goop (whatever it's called) is also the way to.
There, I've made my maiden post.:)
Kind regards,
Nicki.

On 26 Mar 2012, at 18:11, Jeffrey <fongemie at gmail.com> wrote:

> Thanks John.
> 
> Good idea on using some good with adhesion qualities.
> 
> -jeff
> 
> On Mon, Mar 26, 2012 at 1:07 PM, John Birch <Sunstone at cogeco.ca> wrote:
> 
>> We went 316 SS Machine screws on Sunstone, an A-37, Great Lakes boat. Same
>> mast manufacturer, when we did a major overhaul of the rig. Used Sikkens
>> 291, now called something else, but the adhesive version. Felt locktight
>> might be too corrosive, TefGel being non adhesive at all. Didn't want the
>> machine screws to work loose. So far, no problems - the work was done at
>> Klacko Spars in Bronte Ontario back in 1997.
>> 
>> Pulled a couple of machine screws to check, after acetoning out the holes,
>> no whitish aluminum oxide present, looked like the threads had been cut
>> yesterday. Then rebedded them with more Sikkens. None are loose.
>> 
>> Haven't taken the boat offshore in the ocean yet, but given the salinity
>> of the upper Chesapeake, I imaging it would be just fine.
>> 
>> Danny Klacko recommended this approach - he does great work and knows his
>> stuff.
>> 
>> Hope this is a help
>> 
>> John
>> 
>> 
>> ----- Original Message ----- From: "Jeffrey" <alberg30nh at gmail.com>
>> To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.**
>> org <public-list at lists.alberg30.org>>
>> Sent: Monday, March 26, 2012 12:44 PM
>> Subject: [Public-List] Sail track rivets on mast
>> 
>> 
>> Hi everyone,
>>> 
>>> I need to do something about the main sail track. I know many of the
>>> rivets
>>> are bad, last season we kept finding rivets heads on the deck!
>>> 
>>> I've read through past messages in the list archives to see what others
>>> have done. I can't decide between hunting down monel rivets, tapping for
>>> SS
>>> machine screws or just keeping replacing aluminum with aluminum.  I like
>>> the idea of ss machine screws but I'm concerned about corrosion even with
>>> the use of products like TefGel.
>>> 
>>> Has there been some newly formed consensus on the subject? Anyone go the
>>> machine screw route and find it became a problem due to corrosion of the
>>> threads in the aluminum holes?
>>> 
>>> -Jeff
>>> 
>>> Jeff Fongemie
>>> #116 Seagrass
>>> 
>>> http://picasaweb.google.com/**fongemie<http://picasaweb.google.com/fongemie>
>>> ______________________________**_________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/**A30supporters.html<http://www.alberg30.org/store/A30supporters.html>
>>> Please support them.
>>> ______________________________**_________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/**listinfo.cgi/public-list-**alberg30.org<http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org>
>>> 
>>> 
>> 
>> ______________________________**_________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/**A30supporters.html<http://www.alberg30.org/store/A30supporters.html>
>> Please support them.
>> ______________________________**_________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/**listinfo.cgi/public-list-**alberg30.org<http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org>
>> 
> 
> 
> 
> -- 
> Jeffrey Fongemie
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1332784574.0


More information about the Public-List mailing list