[Public-List] Hull Painting

[Lawrence Morris]

CB

Interlux makes a 2 part version of brightside (perfection) that gives you the hardness of awlgrip without the hassles or cost.

I rolled and tip my hull with Perfection and it came out great. 

Sent from my iPhone

Larry Morris

On Mar 1, 2012, at 8:13 AM, "C.B. Currier" <cbcurrier at spinrx.com> wrote:

> Jonathan,
> 
> I find it interesting that many have supported the 2 part or awlgrip
> method for coating the gelcoat.
> 
> When I purchased Infinity from My aunt back in 1997 the boat had Awlgrip
> on her. An expensive paintjob that requires time and much energy to do
> right - and Infinity was done right. However a variety of factors caused
> all manner of dents, dings, scratches and scrapes on the hull which
> revealed white scratches on a beautiful blue hull. I was frustrated
> because I would have to touch up these things and wanted her to look
> great . Infinity was in a beautiful torn dress so to speak.
> 
> I considered my options where were -
> 1. I was going to cruise the boat - and likely some dock or raft up
> would scratch the hull
> 2. I was going to race her - and some bouy or altercation was going to
> scratch the hull
> 3. She would be on a mooring so no problems there but she was docked at
> times and scratches did happen.
> 4. I do haul her every 2 years and much like what my dad did on his
> Friendship Sloop I have no problems redoing the paint job.
> 
> So with this thinking I picked up the Interlux Brightside polyurethane
> paint and have been using that ever since. It is an excellent 10 foot
> paint. It is fine for touchups as well as rolling and tipping the whole
> hull to get that perfect finish. It is more affordable than the
> multiparts and much easier to work with. It lasts years - I have my
> current coat I have not touched up in 6 years and she still looks great.
> You can also wax it and if need be hit it with 110 grit paper and apply
> a new coat.
> 
> I have had racing hulls and 2 part is great if you need an non-porous
> paint that is often below water but for the topsides - stick with the
> Brightside paint - it is easy, affordable and easily maintainable.
> 
> C.B. Currier
> Infinity #57
> 
> PS.
> We went nice and fast with it ....
> 
> 
> On 02/29/2012 07:45 PM, Jonathan Adams wrote:
>> I was planning on painting my hull this season, and am
>> looking for a little advice:
>> 
>> 1.    -    One part or two part? If I am going to go to all
>> the trouble to prep the hull, does it make sense to do two part – even though
>> it is harder to apply?
>> 2.     -   Do I need an undercoat. I am putting this over
>> the original gel coat, and the color will not be changing much. Don Casey’s
>> book does not mention an undercoat.
>> 3.     -   Once prepped, and assuming the weather is good,
>> is this a three coats in three day affair, or in practical terms is it longer than
>> that?
>> 
>> Any other advice? Appreciate any comments.
>> 
>> Jonathan
>> 197
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1330615359.0