[Public-List] Wires through the mast

Mon Mar 5 05:50:58 PST 2012

Thanks Mike, Larry and Jay,

When I pulled the old coax it was chafed through the outer insulation at
the upper exit - but this was probably 10 years of carrying the load of
35 feet of wire. It was wrapped with electrical tape and may once have
had a grommet.

Mike

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Mike Lehman
Sent: Monday, March 05, 2012 7:47 AM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-List] Wires through the mast

Mike, You can use rubber wire grommets (silicone around the wire where
they 
exit). I don't see much chafe on these wires because they don't move
since 
the distance is so short

-----Original Message----- 
From: Meinhold, Michael J.
Sent: Monday, March 05, 2012 7:26 AM
To: Alberg 30 Public List -- open to all
Subject: [Public-List] Wires through the mast

I am replacing the antenna coax and a the steaming/deck light cable in
my mast.
Can anyone recommend a product and/or process to protect the wires from
chafe where they exit the mast?

Mike
Rinn Duin #272

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 

 1330955458.0