[Public-List] Wires through the mast

[George Dinwiddie]

Jim, Gord,

On 3/5/12 1:17 PM, Jim Davis wrote:
> I like putting the wire ties in groups of three, all in different
> directions, about 120 degrees apart.

FWIW, I used the three-wire-tie solution, also. Upon examination when 
the mast was down, I saw that it pushed the wires to one side, the same 
as Gord describes for the one-wire-tie solution. It did not hold 
anything in the middle, as I had expected.

Still, it works, and is much better than the "string of sponges" 
solution I heard about. (The sponges are impossible to remove because 
they catch on every screw.)

  - George

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------




 1330980086.0