[Public-List] Seacock Advice
Chris Martin
notcmartin at yahoo.com
Wed Mar 14 20:36:49 PDT 2012
Thank you, very helpful. I hope to go through this over the weekend.
Chris
________________________________
From: Joe Fernandez <jfride at gmail.com>
To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
Sent: Wednesday, March 14, 2012 10:37 AM
Subject: Re: [Public-List] Seacock Advice
This site was helpful when I serviced my old Wilcox-Crittenden seacocks:
http://www.pbase.com/mainecruising/tapered_cone_seacocks
It also provides an excellent summary of many other projects, including
installation of new seacocks. Highly recommended.
Joe
1969 Alberg Odyssey 30
On Wed, Mar 14, 2012 at 4:30 AM, Mike Lehman <sail_505 at hotmail.com> wrote:
> Wow - this is an old one. If it still works, doesn't leak and if there is
> no evidence of electrolysis (pink colored bronze parts), I would think it
> is fine to clean up and reuse.
>
> -----Original Message----- From: Chris Martin
> Sent: Tuesday, March 13, 2012 7:21 PM
> To: Alberg 30 Public List -- open to all
> Subject: [Public-List] Seacock Advice
>
>
> Hello
>
> One of the spring projects is to inspect and replace any suspect plumbing.
> I was able to free the ancient head exit seacock and need some advice on
> it's future.
>
> The housing is still attached to the boat and the guts are cleaned up at
> home. http://muvvachicken.com/**images/alberg30/head-**seacocksz.JPG<http://muvvachicken.com/images/alberg30/head-seacocksz.JPG>
>
> From some searching it appears the fitting is a Wilcox-Crittenden. Any
> advice on inspecting and rebuilding these? I found this link with some good
> info and instructions. http://www.pearson35.com/**projects/sea_cock.htm<http://www.pearson35.com/projects/sea_cock.htm> From that doc it seems like I basically clean it up and grease it.
> Anything specific to look out for? Seems like a sturdy bit of kit, be it
> older than me. :)
>
> As it's bolted to the hull I'd rather not tear it out and replace unless I
> have to, but want to do this once.
>
> I appreciate any advice
>
> Chris
> ______________________________**_________________
> These businesses support your Association:
> http://www.alberg30.org/store/**A30supporters.html<http://www.alberg30.org/store/A30supporters.html>
> Please support them.
> ______________________________**_________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/**listinfo.cgi/public-list-**alberg30.org<http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org>
> ______________________________**_________________
> These businesses support your Association:
> http://www.alberg30.org/store/**A30supporters.html<http://www.alberg30.org/store/A30supporters.html>
> Please support them.
> ______________________________**_________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/**listinfo.cgi/public-list-**alberg30.org<http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org>
>
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
1331782609.0
More information about the Public-List
mailing list