[Public-List] Head vent location.

[Jonathan Adams]

Mine are about 4 inches forward of cove stripe and a little (~ 2 - 3 cms)  below the strip level.

They are only below because that is the way the port side was when I got the boat, and when I added the starboard side, I matched them up.

JA




>________________________________
> From: Stephen Gwyn <stephen.gwyn at nrc-cnrc.gc.ca>
>To: "public-list at lists.alberg30.org" <public-list at lists.alberg30.org> 
>Sent: Friday, May 11, 2012 12:58 AM
>Subject: [Public-List] Head vent location.
> 
>This discussion of butt-dialling is all very insteresting,
>but where do I put the holes in my boat. How bad is it going
>to look? The boat looks relatively sharp. I just waxed the
>topsides and repainted the cove stripe. Should I put
>the vents in line with the stripe? Or...
>
>Does anybody, particularly George, have pictures of the bow
>showing the vents?
>
>Thanks,
>
>Stephen
>
>-- ------------------------------------------------------------------------
>Stephen Gwyn                       | Tel: 1-250-363-3136
>Canadian Astronomical Data Centre  | Fax: 1-250-363-0045
>Herzberg Institute of Astrophysics | Cell: 1-250-885-6969
>5071 West Saanich Road             | E-mail: Stephen.Gwyn at nrc-cnrc.gc.ca
>Victoria, BC, V9E 2E7, Canada      | http://astrowww.phys.uvic.ca/~gwyn/
>------------------------------------------------------------------------
>
>_______________________________________________
>These businesses support your Association:
>http://www.alberg30.org/store/A30supporters.html
>Please support them.
>_______________________________________________
>Public-List mailing list
>Public-List at lists.alberg30.org
>http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
>
 1336750049.0