[Public-List] Stern tube, Cutless bearing installation

[Joseph Balderson]

That's the way I did it. G-10 tubing and West epoxy.

On Sun, Oct 28, 2012 at 7:12 PM, David Tessier <dfjtessier at hotmail.com> wrote:
>
> The following website, which I believe has been referenced previously on our A30 list, describes replacing the stern tube as part of the transformation of a Triton keelboat into a day sailor:
>
> http://www.lackeysailing.com/daysailor/rebuilding/systems/sterntube.htm
>
> A new stern tube is glassed in place, with the Cutless bearing held in place with set screws.  Unfortunately, the bedding of the cutless bearing, is not detailed!
> David
> Trois Bouleaux #319
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1351466718.0