[Public-List] Deck painting

Gordon Laco mainstay at csolve.net
Sat Aug 24 09:38:07 PDT 2013


Hello again

We (Epifanes) offer a non-skid additive made of polypropylene beads; not hard on feet and knees, and has the property of absorbing the paint they're mixed with so that one doesn't get the black head effect if the paint wears at the 'peaks' 

Any marine store should have it.  

Gord #426 Surprise 



On 2013-08-24, at 9:26 AM, Chris H <chris.herrnberger at gmail.com> wrote:

> There is a company that sells a stamp that matches the boats texture pattern. On the ericson 35 for example the non skid is very deep diamond pattern. Often wondered how that product and kiwigrip would work together. Sorry lost the URL but can be found on youtube. Both sand and walnut shells have heard are very hard on the feet and knees. 
> 
> weatherhelm Rod <weatherhelm at hotmail.com> wrote:
>> Don  ; do you sail barefoot ?  I have walked on a deck that had been
>> treated, but I did not ask with what, and it was too aggressive.  It
>> was hard on bare feet.
>> Rod
>> 
>> 
>> Sent from Samsung Mobile
>> 
>> -------- Original message --------
>> From: Don Lang <potatosailor at yahoo.com> 
>> Date: 23-08-2013  4:51 PM  (GMT-05:00) 
>> To: public-list at lists.alberg30.org 
>> Subject: [Public-List] Deck painting 
>> 
>> 
>> 
>> 
>> 
>> ________________________________
>> I used Kiwi Grip on my boat and love the stuff. Super easy to use and
>> apply.
>> Did not use any primers, the manufacturers rep said none was needed; it
>> covered multi colored spots on deck with no bleed thru or issues.
>> I used it on the diamond textured sea-hood and it turned out
>> beautiful,  I wish I had known about this paint before I spent hours
>> sanding down the texture, its not required.
>> Its important to use a notched trowel to apply it (work with small
>> areas) then use kiwi Grips "loopy goopy" roller lightly over the paint
>> to get the texture. I used the three inch roller sleeve for the whole
>> deck as I had a more finite control tweaking the paint then with the
>> large sleeve and the results were superior.
>> Put it on much thicker than you would regular paint, it hides
>> imperfections and levels itself well. Its a little counter-intuitive at
>> first if you've worked a lot with other paints but once you see it in
>> action you get used to it and the fact that it will stay where you put
>> it when applying a thick paint film. People usually have covering
>> issues if they apply the paint to thinly or they don't use a notched
>> trowel and the manufactures roller.
>> Remove the tape before the paint film starts to dry and pull back along
>> the tape to remove; try not to lift the tape up as the paint cures like
>> a plastic and you don't want to lift the edge of the paint that's
>> stated to cure.
>> It took two gallons to do the deck and cockpit non-skid areas. After a
>> crossing from San Diego to Hawaii and two years under the tropical sun
>> its still looking great and holding fast.
>> 
>> My pics here: 
>> http://alberg30(dot)blogspot(dot)com/2010/02/nonskid-deck-paint.html
>> http://alberg30(dot)blogspot(dot)com/2010/09/kiwigrip-nonskid-continued.html
>> 
>> cheers, Don
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> 
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
> -- 
> Sent from my Android device with K-9 Mail. Please excuse my brevity.
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1377362287.0


More information about the Public-List mailing list