[Public-List] Fwd: A30 castings from Edson
Glenn
brooks.glenn at comcast.net
Tue Dec 17 14:06:28 PST 2013
Here is Pete's reply from Port Townsend Foundry. Probably the photos will be stripped out so not visible, but there they have two or three moulds that look similar to ours. I will take my grudgeon off the boat this week and take it to the foundry for comparison and measuring, then intend to order a casting, if the price quote of $250-$350 stays the same. Will advise what they say.
Glenn
Dolce 318
Sent from my iPad
Begin forwarded message:
> From: "Pete and Cathy Langley" <ptf at olypen.com>
> Date: December 17, 2013 1:44:05 PM PST
> To: "'GLENN P'" <brooks.glenn at comcast.net>
> Subject: RE: [Public-List] A30 castings from Edson
>
> Glenn,
>
> I have attached photos of both styles we have done. The split style should diffidently have bolts near the rudder shaft to stop the possibility of breaking at the first fastener on the haul.
>
> This may require some relief in the stern post where the gudgeon is mounted to accommodate the thicker section for the bolts that draw it together.
>
> Rudder shaft size? And for the shoe what is the stern post angle?
>
> If I can get one old one or a template of mounting surface , stern post and rudder shaft I can match up to our patterns and confirm that we are doing the right thing.
>
> Thanks
>
> Peter R. Langley
> Port Townsend Foundry LLC
> 251 Otto St.
> Port Townsend WA. 98368
> P. 360 385-6425
> F. 360 385-1947
>
> "The bigger the dream, The larger the reality"
>
>
> From: GLENN P [mailto:brooks.glenn at comcast.net]
> Sent: Tuesday, December 17, 2013 12:03 PM
> To: ptf at olypen.com
> Subject: Fwd: [Public-List] A30 castings from Edson
>
> Hi Pete,
>
> Here below is the picture of the Alberg 30 split grudgeon assembly that most of the boats in the fleet needs. Mine is the same as this.
>
> look forward to whatever you can advise regarding casting new assemblies.
>
> Thanks
> Glenn Brooks
> cell 206.790.8711
>
>
>
>
>
> From: "George Dinwiddie" <gdinwiddie at alberg30.org>
> To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
> Sent: Tuesday, December 17, 2013 1:54:43 AM
> Subject: Re: [Public-List] A30 castings from Edson
>
> Gord,
>
> The page http://alberg30.org/maintenance/Steering/Gudgeons/ shows the
> pintles and gudgeons I've seen. As far as I know, the cast bronze one
> (lower of
> http://alberg30.org/maintenance/Steering/Gudgeons/P4280717.jpg) is what
> most people have.
>
> If the ones you have are like that, I'd be more than happy to put a
> photo of them on that page, with a link to your web page or other
> contact information, as you'd prefer.
>
> The rudder show is shown on
> http://alberg30.org/maintenance/Steering/RudderShoe/
>
> - George
>
> On 12/16/13 4:01 PM, Gordon Laco wrote:
> > Hello Michael -
> >
> > William Woodford US #11 just sent me photos - I had misunderstood what you
> > folks were looking for. I have those pintles and gudgeons in bronze on the
> > shelf and would be glad to supply them to members for wholesale. I've just
> > sent that message to William. If anyone else needs them please contact me
> > off line.
> >
> > Gord #426 Surprise
> > (when I'm not sailing, and not with the RCN, I'm North American distributor
> > for Davey, the English classic yacht fitting manufacturer)
> >
> >
> > On 16/12/13 3:49 PM, "Michael Connolly" <crufone at comcast.net> wrote:
> >
> >> Hi Gord,
> > I am sure George Dinwiddie can direct you to many photos of these
> >> parts on the Alberg 30 Web site.
> > Michael
> >
> > ----- Original Message
> >> -----
> >
> > From: "Gordon Laco" <mainstay at csolve.net>
> > To: "Alberg 30 Public List
> >> -- open to all" <public-list at lists.alberg30.org>
> > Sent: Monday, December 16,
> >> 2013 3:26:17 PM
> > Subject: [Public-List] A30 castings from Edson
> >
> > Hello gang -
> >>
> >
> > Edson has responded and with some enthusiasm. ? They¹ve asked for a photo of
> >>
> > the lower gudgeon/rudder shoe as anyone got such a thing they could email
> >>
> > to me?
> >
> > Gord #426 Surprise
> > _______________________________________________
> >>
> > These businesses support your Association:
> >>
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> >>
> > _______________________________________________
> > Public-List mailing list
> >>
> > Public-List at lists.alberg30.org
> >>
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >>
> >
> > _______________________________________________
> > These businesses support
> >> your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please
> >> support them.
> > _______________________________________________
> > Public-List
> >> mailing
> >> list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/pub
> >> lic-list-alberg30.org
> >
> >
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
> --
> ----------------------------------------------------------------------
> When I remember bygone days George Dinwiddie
> I think how evening follows morn; gdinwiddie at alberg30.org
> So many I loved were not yet dead, http://www.Alberg30.org
> So many I love were not yet born. also see:
> 'The Middle' by Ogden Nash http://idiacomputing.com
> ----------------------------------------------------------------------
>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
1387317988.0
More information about the Public-List
mailing list