[Public-List] Standing rigging question

[Glennb]

Thanks John, good resources!  i'll call them.

Glenn 
Dolce 318

Sent from my iPad

On Feb 8, 2013, at 1:31 AM, "John Birch" <Sunstone at cogeco.ca> wrote:

> Try Pearson Yachts, they bought the molds in '62 and did some redesign putting it out as the 41. Palmer Johnson built Bounty II's previously. I believe they are still in business.
> 
> They should have that data. Skenes Elements of Yacht Design might be of help,
> 
> If not Norseman Marine in Fla should be able to help.
> 
> Best of luck
> 
> John
> 
> 
> ----- Original Message ----- From: "Glennb" <brooks.glenn at comcast.net>
> To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
> Sent: Thursday, February 07, 2013 10:07 PM
> Subject: [Public-List] Standing rigging question
> 
> 
>> Hi All,
>> 
>> This is slightly off topic, more like off boat,, but does Anybody know what wire diameter size the upper shrouds would typically be on a 41' full keel heavy displacement sloop?  20,000# displacement there abouts.  The actual boat is a 1961 Rhodes Bounty II.
>> 
>> Thanks much!
>> 
>> Glenn P.
>> dolce 318
>> 
>> Sent from my iPad
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1360342289.0