[Public-List] Standing rigging question

[Lawrence Morris]

Seeing as my family has owned a BII for 44 yrs I should know this. 

It's been 25 yrs since I replaced any rigging.  The upper and lowers are the same diameter. 

Can you tell I am stalling for time. While the old brain churns into the archives. 

3/8 or 5/16. If I had guess it is 3/8". I would measure for you except the boat is in WI. And I live in MD. 

Sent from my iPhone

Larry Morris

On Feb 7, 2013, at 10:07 PM, Glennb <brooks.glenn at comcast.net> wrote:

> Hi All,  
> 
> This is slightly off topic, more like off boat,, but does Anybody know what wire diameter size the upper shrouds would typically be on a 41' full keel heavy displacement sloop?  20,000# displacement there abouts.  The actual boat is a 1961 Rhodes Bounty II.
> 
> Thanks much!
> 
> Glenn P.
> dolce 318
> 
> Sent from my iPad
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1360324016.0