[Public-List] Back stay
Glennb
brooks.glenn at comcast.net
Wed Jan 30 11:15:43 PST 2013
Hi Bill,
It might be a good idea to wait until you can accurately measure your old backstay, then use your existing measurements to order a replacement. The design length may not be the same length as your actual existing backstay. Alternately you could use stalok fittings and buy wire a foot longer thAn design length and build up your own backstay, fitting the lower end to your bracket after you reinstall the mast. i went this route and am very happy with the result.
Best
Glenn
Dolce 318
Sent from my iPad
On Jan 30, 2013, at 10:25 AM, "Bill Ydel" <wcydel at gmail.com> wrote:
> Since I am taking the Mast down to replace the sheave I will also replace
> the back stay. Does anyone have the specifications for that stay so I can
> order it before I take the boat to the yard.
>
> Thank you
>
>
>
>
>
> Bill
>
> SallyB #441
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
1359573343.0
More information about the Public-List
mailing list