[Public-List] Spin pole

[Jonathan Budington]

Thanks. I measured it and it was 10'6", so I bought it. They had marked the length wrong. It's in great shape, and a deal at $200.

Sent from my iPhone

On Jun 28, 2013, at 4:51 PM, "Glennb" <brooks.glenn at comcast.net> wrote:

> Jon 
> 
> It should work.  I have a 10' pole and 10.5' and both sets my spinnaker and 140 genoa well.  I dont race, so un sure if you may give up something on your rating with the shorter pole. 
> 
> glenn
> dolce 318
> 
> Sent from my iPad
> 
> On Jun 28, 2013, at 12:21 PM, "Jonathan Budington" <jon at globalprinting.com> wrote:
> 
>> I'm in need if a spinnaker pole, and Bacon's in Annapolis has a used 10'. The J measurement is 10.5. Would this pole work?
>> 
>> Jon
>> Nimble
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1372453200.0