[Public-List] Public-List Digest, Vol 2531, Issue 1

randall weatherspoon rlwspoon at earthlink.net
Sat Mar 2 17:33:31 PST 2013


The problem is in the base plate under the Mast Base - there was just enough
material left in the middle to lift the Mast Base so it would not lay flat
and when tightening the four corner bolts -- the ears break off. I am having
mine machined flat for new base - which I am making a little thicker.
 
I am having a new set of both Mast head and base CNC machined and would be
glad to share the design and progress with anyone offline. The biggest
problem has been getting the correct profile to match the old mast section
-- made several plastic blanks. Also, if anyone would care to check calcs I
can supply the drawings -- I am beefing up the ears thickness as I found a
crack in the old one last time I had the mast down. I am also looking at the
geometry so that it can be a little lighter. I found that the offset was so
that the backstay could be tightened to induce a bend in the mast ( sure
there is a name for that) for more speed -- as I am a cruiser I am putting
instruments on top so trying to cut the mast weight at the top and one
design I have is to attach the stays at the same level rather than the back
attachment higher -- also trying to get masthead flat on top.

In the middle of a job change and hope to get this done in the next few
months as have been working with the shop for ~ 2-3 years. I have misplaced
my calcs in my last move but anyone could reproduce from drawings if you
know structures.

Later,
Randy 
Marisel #385

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of
public-list-request at lists.alberg30.org
Sent: Saturday, March 02, 2013 3:04 PM
To: public-list at lists.alberg30.org
Subject: Public-List Digest, Vol 2531, Issue 1

Send Public-List mailing list submissions to
	public-list at lists.alberg30.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
or, via email, send a message with subject or body 'help' to
	public-list-request at lists.alberg30.org

You can reach the person managing the list at
	public-list-owner at lists.alberg30.org

When replying, please edit your Subject line so it is more specific than
"Re: Contents of Public-List digest..."


Please do NOT include the entire digest in your reply!
======================================================



Today's Topics:

   1. Re: Mast base (Amy & David Swanson)


----------------------------------------------------------------------

Message: 1
Date: Fri, 1 Mar 2013 19:26:50 -0500
From: "Amy & David Swanson" <zira at bellsouth.net>
To: "Alberg 30 Public List -- open to all"
	<public-list at lists.alberg30.org>
Subject: Re: [Public-List] Mast base
Message-ID: <8BC1968E043D46798A79C6EF7C054DDB at acer55c1d4102c>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
	reply-type=original

Ditto for ours (229

David Swanson
Strayaway Child
Alberg 30 #229

----- Original Message -----
From: "Jason S" <mpcylinderheads at gmail.com>
To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
Sent: Friday, March 01, 2013 12:24 PM
Subject: Re: [Public-List] Mast base


> Looks like mine broke from someone over tightening the bolts with very 
> thin
> washer... ( not washers,). I've washed vee'd basically acting as a wedge
> and broke the ears off. 



------------------------------

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


End of Public-List Digest, Vol 2531, Issue 1
********************************************


 1362274411.0


More information about the Public-List mailing list