[Public-List] Public-List Digest, Vol 2657, Issue 2

[Michael Connolly]

David, 

I would say if you can't find another source, then you could probably make the A30 shoe fit the A35. R udder is bigger on the 35 and I wouldn't know how much more stress it would place on the shoe.  Both boats have full keels with keel hung rudders. 

Michael #133 



----- Original Message -----


From: "David Davidse" <david at truehand.com> 
To: public-list at lists.alberg30.org 
Sent: Monday, September 16, 2013 3:21:01 PM 
Subject: Re: [Public-List] Public-List Digest, Vol 2657, Issue 2 

Thanks, Gord. 
I'll give Edson a try. 

Hi George, 
Yes, I'm well aware Pearson made the A35.(Mine was rebuilt, and 
re-badged, by Palmer Johnson) Any reason to doubt the rudder shoes would 
be different or are you just taking a wild guess? 

Dave 

On 9/16/2013 3:06 PM, public-list-request at lists.alberg30.org wrote: 
>I wonder if Edson might 
> have information about whether or not they supplied that fitting to 
> Pearson? If you get the right person there, they're quite helpful. Gord 
> #426 Surprise On 16/09/13 12:58 PM, "George Dinwiddie" 
> <gdinwiddie at alberg30.org> wrote: 
>> >David, 
>> > 
>> >On 9/16/13 7:49 AM, David Davidse wrote: 
>>> >>Howdy folks, 
>>> >> 
>>> >>I need to purchase a rudder shoe for my A35. As far as I can gather it's 
>>> >>the same as the A30? 
>> > 
>> >I doubt it. The A35 was built by Pearson. 
>> > 
>> >   - George 

_______________________________________________ 
These businesses support your Association: 
http://www.alberg30.org/store/A30supporters.html 
Please support them. 
_______________________________________________ 
Public-List mailing list 
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 

 1379430018.0