[Public-List] Repower, rebuild or sell
David Terrell via Public-List
public-list at lists.alberg30.org
Fri Dec 12 06:39:14 PST 2014
Brian
Some years ago I replaced myold A4 with another one that had very few
hours on it. I am pleased with the result. I do not think you should be
scared off by an A4 if it is in good condition.
David, 432
On Wed, Dec 10, 2014 at 3:18 PM, Brian Zinser via Public-List wrote:
> I am in the UP. Boat is in DeTour Village, Engine is currently at
> Mertaug's in Cedarville.
>
> If I decide to rebuild, I might give you a call. Don't really want an
> Atomic 4.
> Brian
>
> -----Original Message-----
> From: Public-List [mailto:public-list-bounces at lists.alberg30.org] On
> Behalf Of Dwayne Back via Public-List
> Sent: Wednesday, December 10, 2014 2:55 PM
> To: Glenn Brooks; Alberg 30 Public List -- open to all
> Subject: Re: [Public-List] Repower, rebuild or sell
>
> Brian,
> I currently have a 1965 Grey Marine engine that I believe all that is
> wrong with it is the carburetor fouled up, but not 100% certain. I am
> quite confident the block is fine so between the two you may be able
> to rebuild a decent engine and have spare parts. It has been stored
> inside heated building for last couple of years. If you wanted the
> engine and you are welcome to it. Biggest issue is I am in Detroit
> area, not sure of your location.
> Dwayne#94
> On Wednesday, December 10, 2014 2:38 PM, Glenn Brooks via
> Public-List <public-list at lists.alberg30.org> wrote:
>
> Brian, It might be time well spent to google craigslist for used
> marine engines for a few days. I've seen both a rebuilt atomic 4 and
> several used but running small marine diesels for sale (cheap) around
> the Seattle area over the last few months. If the price is right and
> the equipment runs OK, you could afford to ship a used or rebuilt
> engine from anywhere in the country back to your location more
> economically than buying new, probably for less than $400 freight
> cost.
>
> BTW, don't be put off by the work involved in changing engine mounts.
> I redid mine to correct some alignment issues this fall. IT was no big
> deal. Took less than 3 hours to glass in new beds and bolt back up the
> existing engine mounts.
>
> Good luck,
>
> Glenn Dolce #318
>
>
>
> Sent from my iPad
>
>> On Dec 10, 2014, at 10:33 AM, Wes Gardner via Public-List
>> <public-list at lists.alberg30.org> wrote:
>>
>> Hey Brian,
>>
>> Looks like to me you have two options-your current motor with cracked
>> block is toast leaving you with the Automatic 4 which you should be
>> able to get at a reasonable price, installed. You'd probably
>> increase the value of the boat over its current "project boat" status
>> dollar for dollar??? The other option is, as you've stated, the new
>> diesel option where you will not recover the cost dollar for dollar.
>>
>> Obviously there are a few variables going on here, personally I think
>> I'd go the A4 route-it'll be rebuilt, right?
>>
>> You can then sail her for a couple more years or sell. Can I assume
>> you owe nothing on her as she sits?
>>
>> Or maybe it's the project boat route where you take your 3 or 4 K and
>> walk away.
>>
>> Wes
>>
>> Sent from my iPad
>>
>>> On Dec 10, 2014, at 11:02 AM, Brian Zinser via Public-List
>>> <public-list at lists.alberg30.org> wrote:
>>>
>>>
>>> I have owned #134 for more than 15 years. She has a Gray Marine Sea
>>> Scout
>>> which has never let us down. Two years ago I noticed some loss of
>>> power and
>>> this season I started to notice water in my oil. Anyway, when she
>>> was hauled
>>> out this fall I had the engine removed and diagnosed. This is the
>>> report I
>>> received:
>>>
>>> We did a compression test on the motor with the following results:
>>> 110lbs. #1 cylinder; 100 #2lbs. cylinder; 0lbs. #3 cylinder; 40lbs.
>>> # 4
>>> cylinder
>>>
>>> We found the motor has a cracked block and has two broken valve
>>> springs with
>>> a bent valve.
>>>
>>> The motor had water in the oil and the oil was very milky.
>>>
>>> We removed the head to do visual inspection of valves and head
>>> gasket and do
>>> not believe the water is coming through the head gasket, but that
>>> it's
>>> coming through at a different point, possibly the crack in the
>>> block.
>>>
>>> In our judgement we believe it would be best to replace motor.
>>>
>>> The shop that did the diagnosis has a used Atomic 4 they want to
>>> sell me. I
>>> have spoken/sent photos to Gray Marine in Illinois and he has
>>> informed me
>>> that he gets them like this all the time. No sweat. Cannot give me a
>>> quote
>>> without seeing.
>>>
>>> Other options include repowering with a diesel or selling the boat
>>> as a
>>> "project boat"
>>>
>>> For the most part, the boat is in fairly good shape. Only
>>> freshwater, no
>>> major remuddles. Average equipment, i.e. newer sails, ProFurl
>>> furler,
>>> dodger, Origo stove.
>>>
>>> I also have a decent trailer (not a highway trailer, but certainly
>>> more than
>>> a yard trailer - it can easily be used on secondary roads.)
>>>
>>> Thinking of selling. Any opinions on what might be a fair value for
>>> the boat
>>> with a torn down problem engine?
>>>
>>> Brian Zinser
>>> #134
>>>
>>>
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
1418395154.0
More information about the Public-List
mailing list