[Public-List] Rudder drawing

Kristian Larson k.larsonbc at gmail.com
Wed Feb 19 06:37:34 PST 2014


Thanks a lot Glenn,
Spring is approaching and it's time for me to start getting organised to do
this.
It's a bit of an intimidating project but am looking forward to putting a
new and improved rudder on Mara!
Thanks,
Kristian


On Mon, Feb 17, 2014 at 4:05 PM, Glenn Brooks <brooks.glenn at comcast.net>wrote:

> Hi Kristian,  I can send these measurements to you as a series of offsets.
>  The trailing edge is somewhat elliptical as I recall, so has different
> measurements along the vertical  axis. I will work on it tonight.
>
> Glenn
> Dolce 318
>
> Sent from my iPad
>
> > On Feb 16, 2014, at 12:49 AM, Kristian Larson <k.larsonbc at gmail.com>
> wrote:
> >
> > Hi Glen,
> > I'm planing on doing a rudder build this spring for my boat Mara this
> > spring. It would be nice to see those plans before i do the fabrication.
> > The main dimension I'm missing is the depth of the rudder  from the keel
> to
> > the trailing edge of the rudder.
> > I lost Mara's rudder last summer unexpectedly while sailing in a stiff
> wind
> > last summer.
> >
> > Thanks
> > Kristian Larson
> > Alberg #127 Mara
> >
> >
> > On Sat, Feb 15, 2014 at 6:41 PM, George Dinwiddie
> > <gdinwiddie at alberg30.org>wrote:
> >
> >> Glenn,
> >>
> >> If you'd like to take a high-res photo, I'll post it on the site.
> >>
> >> - George
> >>
> >>
> >>> On 2/15/14, 6:41 PM, Glenn Brooks wrote:
> >>>
> >>> Hello all,
> >>>
> >>> I just re-discovered my long lost full size rudder drawing for dolce
> >>> #318 (1968 hull layup) out in the garage.  If anyone is in need of a
> >>> rudder drawing , let me know and I can send it to you.
> >>>
> >>> Thanks
> >>> Glenn Brooks
> >>> Dolce 318
> >>
> >> --
> >> ----------------------------------------------------------------------
> >>  When I remember bygone days                         George Dinwiddie
> >>  I think how evening follows morn;            gdinwiddie at alberg30.org
> >>  So many I loved were not yet dead,           http://www.Alberg30.org
> >>  So many I love were not yet born.                          also see:
> >>               'The Middle' by Ogden Nash     http://idiacomputing.com
> >> ----------------------------------------------------------------------
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> These businesses support your Association:
> >> http://www.alberg30.org/store/A30supporters.html
> >> Please support them.
> >> _______________________________________________
> >> Public-List mailing list
> >> Public-List at lists.alberg30.org
> >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>

 1392820654.0


More information about the Public-List mailing list