[Public-List] Alberg 30 boom gooseneck

[Wes Gardner via Public-List]

My old roller furling gooseneck has also been welded up hard.  The downhaul
is still in place.  I was debating going with a cunningham arrangement but
left the downhaul.  I also can send pics if you'd like.

Wes


On Thu, Jul 24, 2014 at 3:24 PM, thomascwcj via Public-List <
public-list at lists.alberg30.org> wrote:

> Kristian:
> Two years ago I replaced a sliding gooseneck on my A30 with a permanent
> one. It was fabricated by Garhauer Marine and is a stainless steel work of
> art. I don't know how they did it for the low price they charged. It's
> performed so well that I've forgotten it's on the mast. I'd imagine they
> still have the fabrication design specs on file. I have before and after
> pix if you're interested in going in the "permanent fix" direction" and
> give me your email address.
> Chuck Thomas
>
>
> On Wednesday, July 23, 2014 9:37 PM, Kristian Larson via Public-List <
> public-list at lists.alberg30.org> wrote:
>
>
>
> Oh, that would be great if I can get it welded. As nice as a new boom would
> be, it's not a good time to spend the money on one. I've got #127 out of
> the water getting a new rudder fitted, new Dux standing rigging, new wood
> spreaders, new running rigging along with many other smaller jobs. I hope
> to have her sailing by the end of the week!
>
> Yeah, I could see a accidental jibe causing that crack. We had a jibe onto
> the preventer once that was fairly violent. Lots of force produced with
> just a small amount of movement of the boom!
> I'll be sure to update with any progress.
>
> Kristian
>
>
> On Wednesday, July 23, 2014, Kristian Larson <k.larsonbc at gmail.com> wrote:
>
> > Hi,
> > After stripping the paint off Mara's boom I discovered a large crack in
> > the gooseneck right above where the old roller furling crank handle would
> > have attached.  Has anyone on here had this issue and if so what solution
> > to it did you find.?
> > My immediate thought is to weld it but I'm not sure if this would work
> > here...?
> > Is there a source for new goosenecks that fit the original boom?
> > Any help it troubleshooting this matter would be greatly appreciated.
> >
> > Thanks,
> > Kristian Larson
> > Mara #127
> > Squamish BC
> >
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>

 1406232736.0