[Public-List] Rigging Lengths / Strippers - solution

[John Birch via Public-List]

Hi Bob, How awful. Someone in the game is the culprit, street thieves would 
never do such a thing.

IM Barient was bought out by Lewmar and the brand killed about 20 years ago. 
Lewmar used their patented technology on their new winches.

You have a serious and insurable problem. Will be duce difficult to find 
replacement strippers.

You might get lucky, but luck is not a plan.

Suggest either replacing them with Andersons under an insurance claim - no 
justification for pro rating their value. Now you get to find out whether 
you have a good Ins Co or not.

The other alternative is to have the strippers custom machined. The cost too 
should be insurable.

Someone in the game is a skunk, and that's just terrible. However, the 
solution above is what I'd suggest.

You could also contact your Ins Co to find out if there are any insured boat 
hurricane write-offs that were equipped with Barient 22 Self Tailers - if 
so, that would be the cheapest route.

Best of luck

John




----- Original Message ----- 
From: "George Dinwiddie via Public-List" <public-list at lists.alberg30.org>
To: <public-list at lists.alberg30.org>
Sent: Wednesday, July 23, 2014 8:53 AM
Subject: Re: [Public-List] Rigging Lengths / Strippers


> Mike,
>
> Strippers are the arms on a self-tailing winch.
>
> Bob, you might call Bacon's in Annapolis to ask about strippers for your 
> Barient 22s. If they can't help you, take a look at 
> http://www.arco-winches.com/products/spares
>
>  - George
>
> On 7/23/14, 7:09 AM, Mike Lehman via Public-List wrote:
>> Hey Bob,
>>
>> Each boat with regard to the upper shrouds may have slightly different
>> lengths. It is advisable to measure your shrouds before cutting new
>> ones. That's why you don't find measurements on the website.
>> What are strippers?
>>
>>
>>
>>
>> ~~~_/)_/)~~ Mike Lehman ~~_/)~~~
>>
>>
>> -----Original Message----- From: via Public-List
>> Sent: Tuesday, July 22, 2014 9:48 PM
>> To: Alberg 30 Public List -- open to all
>> Subject: [Public-List] Rigging Lengths / Strippers
>>
>>      I need to replace the upper / outer shrouds on #76, but I can’t
>> find the dimensions on the site. Also, someone relieved me of the
>> strippers off the Barient 22 winches ( headsail ) that were previously
>> installed on the boat. Any recommendations on where to find these parts.
>>
>> As Always, Thanks In Advance,
>>
>> Bob Bohmer #76
>
> -- 
>  ----------------------------------------------------------------------
>   When I remember bygone days                         George Dinwiddie
>   I think how evening follows morn;            gdinwiddie at alberg30.org
>   So many I loved were not yet dead,           http://www.Alberg30.org
>   So many I love were not yet born.                          also see:
>                'The Middle' by Ogden Nash     http://idiacomputing.com
>  ----------------------------------------------------------------------
>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 



 1406134905.0