[Public-List] Rigging Lengths / Strippers - solution

Wed Jul 23 11:04:36 PDT 2014

Hello - 

I agree - you'd be very fortunate to find Barient parts of the right type
anywhere.  They've been gone a long time.

Andersens are probably the best winches on the market today.

Gord
Surprise 426

On 23/07/14 1:01 PM, "John Birch via Public-List"
<public-list at lists.alberg30.org> wrote:

> Hi Bob, How awful. Someone in the game is the culprit, street thieves would
> 
never do such a thing.

IM Barient was bought out by Lewmar and the brand
> killed about 20 years ago. 
Lewmar used their patented technology on their new
> winches.

You have a serious and insurable problem. Will be duce difficult to
> find 
replacement strippers.

You might get lucky, but luck is not a
> plan.

Suggest either replacing them with Andersons under an insurance claim -
> no 
justification for pro rating their value. Now you get to find out whether
> 
you have a good Ins Co or not.

The other alternative is to have the
> strippers custom machined. The cost too 
should be insurable.

Someone in the
> game is a skunk, and that's just terrible. However, the 
solution above is
> what I'd suggest.

You could also contact your Ins Co to find out if there are
> any insured boat 
hurricane write-offs that were equipped with Barient 22 Self
> Tailers - if 
so, that would be the cheapest route.

Best of
> luck

John

----- Original Message ----- 
From: "George Dinwiddie via
> Public-List" <public-list at lists.alberg30.org>
To:
> <public-list at lists.alberg30.org>
Sent: Wednesday, July 23, 2014 8:53
> AM
Subject: Re: [Public-List] Rigging Lengths / Strippers

> Mike,
>
>
> Strippers are the arms on a self-tailing winch.
>
> Bob, you might call
> Bacon's in Annapolis to ask about strippers for your 
> Barient 22s. If they
> can't help you, take a look at 
>
> http://www.arco-winches.com/products/spares
>
>  - George
>
> On 7/23/14, 7:09
> AM, Mike Lehman via Public-List wrote:
>> Hey Bob,
>>
>> Each boat with regard
> to the upper shrouds may have slightly different
>> lengths. It is advisable
> to measure your shrouds before cutting new
>> ones. That's why you don't find
> measurements on the website.
>> What are strippers?
>>
>>
>>
>>
>> ~~~_/)_/)~~
> Mike Lehman ~~_/)~~~
>>
>>
>> -----Original Message----- From: via
> Public-List
>> Sent: Tuesday, July 22, 2014 9:48 PM
>> To: Alberg 30 Public
> List -- open to all
>> Subject: [Public-List] Rigging Lengths /
> Strippers
>>
>>      I need to replace the upper / outer shrouds on #76, but I
> can¹t
>> find the dimensions on the site. Also, someone relieved me of the
>>
> strippers off the Barient 22 winches ( headsail ) that were previously
>>
> installed on the boat. Any recommendations on where to find these parts.
>>
>>
> As Always, Thanks In Advance,
>>
>> Bob Bohmer #76
>
> -- 
>
> ----------------------------------------------------------------------
>
> When I remember bygone days                         George Dinwiddie
>   I
> think how evening follows morn;            gdinwiddie at alberg30.org
>   So many
> I loved were not yet dead,           http://www.Alberg30.org
>   So many I
> love were not yet born.                          also see:
>
> 'The Middle' by Ogden Nash     http://idiacomputing.com
>
> ----------------------------------------------------------------------
>
>
>
>
> _______________________________________________
> These businesses support
> your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please
> support them.
> _______________________________________________
> Public-List
> mailing list
> Public-List at lists.alberg30.org
>
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
> 

_______________________________________________
These businesses support
> your Association:
http://www.alberg30.org/store/A30supporters.html
Please
> support them.
_______________________________________________
Public-List
> mailing 
> list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/pub
> lic-list-alberg30.org

 1406138676.0