[Public-List] Alberg 30 boom gooseneck

[Glenn Brooks via Public-List]

Kristian,  here is one other west coast source.  Iam sure there are others...

http://www.ballengerspars.com

These folks are in Northern California and apparently outfitted Web Chilies' Moore 24 for his present and 6th solo circumnavigation.  He just arrived in American Samoa, 27 days out from Hawaii, 87 from San Diego.  He recommends Ballenger spars in his log WWW.inthepresentsea.com.  A very interesting read BTW.  

Good luck on replacement!

Glenn b
dolce 318

Sent from my iPad

> On Jul 23, 2014, at 3:49 PM, Kristian Larson via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Thanks Glen,
> I'll give them a call.
> I have a picture I can post. Maybe a link to my Instagram page would work
> best for the picture.?
> I'm glad I inspected the boom, it looks like that crack has been there a
> while. It didn't crack where a screw was placed to diss able the
> rollerfurler function which is odd.
> 
>> On Wednesday, July 23, 2014, Kristian Larson <k.larsonbc at gmail.com> wrote:
>> 
>> Hi,
>> After stripping the paint off Mara's boom I discovered a large crack in
>> the gooseneck right above where the old roller furling crank handle would
>> have attached.  Has anyone on here had this issue and if so what solution
>> to it did you find.?
>> My immediate thought is to weld it but I'm not sure if this would work
>> here...?
>> Is there a source for new goosenecks that fit the original boom?
>> Any help it troubleshooting this matter would be greatly appreciated.
>> 
>> Thanks,
>> Kristian Larson
>> Mara #127
>> Squamish BC
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1406158454.0