[Public-List] shaft zinc

[Bill Wallace]

If your shaft is a 1" shaft - that is a 3/4" thread, then this item:
http://www.marineoutfitters.ca/index.cfm?category=10025|10281&product=24351580&code=628309108731

is probably what you want - I think you posted the size for 1 1/4" shaft - which you could very well have, but I know my shaft is 1".  

I usually just throw a digital micrometer onto the shaft to figure out what it is, as it can be hard to measure with a tape measure at all accurately.

Bill.


On Monday, June 2, 2014 10:36:40 AM, gordon white <gewhite at crosslink.net> wrote:
 


      It is time to replace the zinc anode on the end of the propellor 
shaft - "spinner" shaped zinc about 1 5/8" x 2" that fits over the 
propellor nut and attaches with a socket head screw.

     My local West Marine and local hardware store, that used to carry 
this size (up to last year) no longer stock them.

     The closest I can find in my West Marine catalog is CMPZ size "B"  
model 132649

     Anyone know if this is the correct one?

  - Gordon White
Brigadoon II  # 275


_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 1401720500.0