[Public-List] Interior Paint

[via Public-List]

Hello,

I purchased #322 also 1968 in the fall and just finished painting the interior.  I used white gloss Tremclad which is the Canadian equivalent of rustoleum.  Did not do lockers at waterline and below as I wanted to see any potential trouble with the fiberglass floor over the ballast and keel.  Otherwise, it is excellent for adhesion over well prepped previous paint job.  Expect about 3 gallons for 3 coats front to back!  I have refinished the woodwork with Minwax stain (red mahogany) and sealed with Lemon oil.  Looks nice, smells nice! 

All the best,

Maurice


---- Original Message ----
From: John Brugeman via Public-List <public-list at lists.alberg30.org>
To: public-list <public-list at lists.alberg30.org>
Sent: Mon, Apr 27, 2015 8:15 am
Subject: [Public-List] Interior Paint


Need some interior paint help.  I have a 1968 Alberg #306 (no liner) that has
been previously painted with I don't know what. We have started in the forward
section of the boat and prepped all areas by removing all peeling paint and then
wire brushed all surfaces. The boat is dry with no mold and some areas are raw
fiberglass.  I am looking at Interlux and Pettit products and I am at a loss as
to what specific product to use.  I am sure there are some of you that have gone
thru this process before and I would entertain any advice you could offer.  I am
only the second owner of this great boat and it has been well maintained over
the years and I would like to do it right.  Thank you in
advance.
_______________________________________________
These businesses
support your
Association:
http://www.alberg30.org/store/A30supporters.html
Please support
them.
_______________________________________________
Public-List mailing
list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org