[Public-List] Dodgers

Michael Connolly via Public-List public-list at lists.alberg30.org
Tue Aug 4 06:58:20 PDT 2015


James, 
I sail with David Terrell on #432 in Traverse City, MI.  Last year he invested in a new dodger/bimini combination the likes of which I have never seen.  I took many photos. Perhaps with David's blessing I could send photos to George so all could see this lovely/functional design. I believe David raised the boom a few inches to increase the head room. The frame is stiff enough to accommodate hand rails and the canvas has many nice features as well. 
Michael #133 

----- Original Message -----

From: "James Allocco via Public-List" <public-list at lists.alberg30.org> 
To: "David Van Denburgh" <denburgh at andrews.edu>, "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org> 
Sent: Monday, August 3, 2015 6:35:35 PM 
Subject: Re: [Public-List] Dodgers 

Hi all, 

I have a dodger, thankfully I purchased it 22 years ago so the sticker 
shock was less of an issue.  it was a necessity when we sailed on Lake 
Ontario. Now that we are in  North Carolina a bimini is very desirable. 
 David, as someone who works with canvas and who aiso owns an Alberg I'd 
like to ask you a question about biminis.    I've looked online for picture 
of boats with  biminis that might work with  end boom sheeting.  The few 
that I found were so far forward that the either are used without a dodger 
or extend forward above and beyond the dodger. Having both a dodger  and a 
bimini it might make it  difficult to get out of the cockpit.  Also there 
is not a lot of head room beneath the boom. With all of these 
considerations to you have an opinion if its possible to  have a bimini. 

Thanks to all, 
Jim 

On Mon, Aug 3, 2015 at 5:57 PM, David Van Denburgh via Public-List < 
public-list at lists.alberg30.org> wrote: 

> I do sail and canvas work. My dodgers start at $2000 with 1" SS tubing, 
> Sunbrella, Strataglass, chafe reinforcement where necessary, and solid 
> struts. Dodgers take a lot of time to make. The frames have to be designed, 
> bent, and fitted on the boat before the dodger can be patterned - again, on 
> the boat to accommodate winches, lines, etc. Even after the frame and 
> patterns are made, there are a lot of steps to construct the dodger. And 
> then, finally, your canvas person should come back out to the boat for a 
> final fitting, which can take an hour or two. 
> 
> They really are labor intensive. $2000 is a lot of money, but my own 
> dodger is over 7 years old and still doing fine. Anyway, FWIW. 
> 
> David 
> 
> 
> Sent from my iPhone 
> _______________________________________________ 
> These businesses support your Association: 
> http://www.alberg30.org/store/A30supporters.html 
> Please support them. 
> _______________________________________________ 
> Public-List mailing list 
> Public-List at lists.alberg30.org 
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> 
_______________________________________________ 
These businesses support your Association: 
http://www.alberg30.org/store/A30supporters.html 
Please support them. 
_______________________________________________ 
Public-List mailing list 
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 




More information about the Public-List mailing list